Analog Devices AD587KN 10V reference

10vref_ad587 (1)

SteelCity Electronics published an article about Analog Devices AD587KN 10V reference:

I recently got hold of an Analog Devices AD587KN high precision 10.000V reference chip.
This model of chip has an output value of 10.000V ± 5mV (that is, an output value of 9.995V to 10.005V) straight out of the factory. A voltage drift of 10ppm/°C at 25°C meaning that the output voltage will drift by 10μV for each 1°C the chip is exposed to. Additionally, the chip has a voltage trim input, so if you have access to a precision voltmeter, the chip’s output value can be adjusted even closer to 10.000V.
Alternatively, the chip’s output can be trimmed to a value of 10.24V. You may think that a value of 10.24V seems like a strangely familiar number. A value of 1024 is the decimal representation of 10bits, that is 2∧10 = 1024. Why would I want a voltage reference that outputs a value of 10.24V? Because it makes any ADC or DAC conversions much simpler.

Details at SteelCity Electronics site.

Leave a Reply

Your email address will not be published. Required fields are marked *